RAIDO Pragma HD 320


RAIDO Pragma HD 320 synthetic industrial gear oil based on synthesized hydrocarbons under addition of special additives the following properties are obtained: 

  • a very good resistance towards high pressures and hock loads
  • a good resistance against high temperatures
  • good rust- and corrosion preventing properties
  • an excellent prevention from wear
  • a very good activity against foaming
  • a low pour point


RAIDO Pragma HD 320 synthetic oil is very suitable for the lubrication of heavy loaded mechanical gearboxes and bearings with a high thermal load. In comparison with mineral industrial gear oils a substantial extension of the oil drain interval is possible. This oil is compatible with all seal materials and paints normally specified for use with mineral oils. So no special change-over procedure is necessary.




Performance level
AGMA 9005-E02 (EP)
AIST (US Steel) 224
David Brown S1.53.106
DIN 51517-3 CLP
ISO 12925-1 Type CKD

Physical Characteristics:

Density at 15 ° C, kg / l: 0,858
Viscosity 40 ° C, mm² / s: 320.00
Viscosity 100 ° C, mm² / s: 35,00
Viscosity index: 162
Flash Point COC, ° C: 208
Pour Point, ° C: -39
Acid number, mg KOH / g: 1.10